Calibration - JVC KD-NX10 Bedienungsanleitung

Calibration

After commissioning, a calibration journey is required. During the jour-
ney, the speed signal (GAL) is automatically adapted to the vehicle-spe-
cific data and the gyro sensor is automatically adapted to the installation
position of the unit.
The distance to be covered depends on the type of vehicle and the local
conditions.
The navigation system is only ready for operation on comple-
tion of the calibration journey. The main navigation menu
is displayed. Final precision is only achieved after a further
journey.
• The adjacent display appears after the language installation.
It is possible that GPS reception has deteriorated as a result of
changing the vehicle position and due to obstructions. In this case,
the adjacent display appears.
Adequate GPS reception must be ensured for the calibration
journey. This means at least 2-D FIX. With GPS FIX 3-D the
calibration will be quicker. However: a lower accuracy of the
GPS signal (2-D FIX) does not lead to a poorer calibration, but
instead will mean that the time and distance needed for the cal-
ibration will increase.
Installation/Connection Manual
199