Disc Operations; Playing A Disc In The Receiver - JVC KD-NX901 Bedienungsanleitung

Disc operations

The disc type is automatically detected, and
playback starts automatically (for DVD:
automatic start depends on its internal program).
• Turn on the monitor for playing a DVD or
VCD. You can also control the audio CD, CD
Text, and MP3/WMA playback by referring
to the monitor screen. (See pages 57 and 58.)
If the current disc is an audio CD, CD Text,
MP3/WMA, or VCD without PBC, all tracks
will be played repeatedly until you change the
source or eject the disc.
• If a title list or disc menu appears while
playing a DVD or VCD with PBC, see "Disc
menu operations" on page 53.
The following marks are used to indicate
the playable discs....
DVD Video
Video CD
(with/without PBC)
MP3/WMA disc
48

Playing a disc in the receiver

Video CD with PBC
Audio CD/
CD Text
All discs listed here
Before performing any operations, make
sure the following....
• For DVD playback, you can change the Setup
Menu setting as you like. (See pages 59 – 61.)
• For DVD/CD playback, using the remote
controller is more attractive. You can enjoy
more functions.
When you want to operate the DVD/CD
player using the buttons on the control
panel, see "Other disc operations" on pages
62 to 65.
If " " appears on the monitor when
pressing a button, the disc cannot accept an
operation you have tried to do.
• In some cases, without showing "
operations will not be accepted.
When you play back a multi-channel DVD
software such as Dolby Digital and DTS,
signals are down converted into 2 channels,
and reproduced through the speakers and
LINE OUT jacks on the rear. (See also
"DOWN MIX" on page 61.)
• To fully enjoy multi-channel DVD
software, connect a multi-channel decoder
compatible with these sources to the
DIGITAL OUT terminal on the rear. (See
also "DIGITAL AUDIO OUTPUT" on
page 61.)
,"