Indications
TA Volume
Traffic
announcement
volume
P-Search
Programme search
IF Filter
Intermediate
frequency filter
DAB AF
*
4
Alternative
frequency reception
Announce
*
4
Announcement
standby reception
Beep
Beep
ExtInput
*
5
External Input
Telephone
Telephone muting
Amp Gain
Amplifier gain
control
3
*
Depends on the amplifier gain control.
4
*
Displayed only when the DAB tuner is connected.
5
*
Not display when CD changer or external component is selected for the source.
Selectable settings, [reference page]
When a Traffic Announcement is tuned in by TA Standby
Reception, the volume level automatically changes to the preset
level.
[Initial: 15]; Volume 0 – Volume 30 or Volume 50*
On: The receiver tunes in to another frequency broadcasting the
same programme as the original preset RDS station is if the
preset station signals are not sufficient.
Off: [Initial]; Cancels.
Auto: [Initial]; Increases the tuner selectivity to reduce
interference noises between the stations. (Stereo effect will
be degraded.)
Wide: Subject to the interference noises from adjacent stations, but
sound quality will not be degraded. (Stereo effect will not
be degraded.)
On: [Initial]; Tracks the programme among DAB services and FM
RDS stations, [102].
• AF indicator lights up.
Off: Cancels.
Select one of the 9 announcement types for Announcement Standby
Reception, [102].
Travel [Initial]/Warning/News/Weather/Event/Special/
Rad Inf/Sports/Finance
On:
[Initial]; Beep sounds when you operate the unit.
Off:
Cancels.
Changer: [Initial]; To use a JVC CD changer.
Ext In:
To use any external component.
Muting1/Muting2: Select either one which mutes the sounds
while using the cellular phone. (This does not affect
the route guidance.)
Off: [Initial]; Cancels.
You can change the maximum volume level of the unit.
High Pwr: [Initial]; Volume 0 – Volume 50
Low Pwr:
Volume 0 – Volume 30 (Select this if the maximum
power of the speaker is less than 50 W to avoid
damaging the speaker.)
Off:
Deactivates the built-in amplifier.
3
89