JVC KD-NX901 Bedienungsanleitung Seite 12

5
E
F
12
5
After confirming all the above
connections, drive the car to start
calibration.
• A certain speed is required for calibration.
• Calibration time differs among the cars.
• During calibrating, you can use the System as
the receiver (you can listen to the music, etc.)
• If you turn off the ignition switch, calibration
is temporarily stopped. When it is turned on,
calibration will restart.
Once calibration is finished (when the
learning level becomes "2"), the current
position information appears on the
display.
E: If you are on some road, the road name
appears.
F: If not, the latitude/longitude appear.
Navigation (functions such as guidance) cannot
be used until calibration is complete.
• "Function not available while driving." appears
if you try to enter the destination without the
parking brake engaged (or without the parking
brake lead connected). You cannot enter the
destination.