Environmental Protection; Troubleshooting; Technical Data - Bosch Rexroth PRC7000 MGDM-BASIC Betriebsanleitung

R911407405 | Rexroth PRC7000 MGDM-Basic
also be recovered using special separating methods. The plastic materials
recovered by this process can be disposed of thermally.

20.3 Environmental protection

Our products do not contain any hazardous materials which may be released
by their intended use. Therefore, no negative effects on the environment
are to be expected under normal circumstances.

21 Troubleshooting

The units are sturdily built. Nevertheless, disturbances may occur in exceptional
cases:
• by wrong electrical connection or overvoltage in the power supply,
• by insufficient cooling, maintenance or overload,
• by exceeding the maximum current values (parametrization) or
monitoring values.
Check the status of the LEDs in section 16.

22 Technical Data

Environmental Data
Tab. 16:
Type of construction MGDM in one housing
Degree of protection IP 65 with connected connections or with protection
caps (included with delivery)
Orientation Vertically or placed on the back side
Temperature range +10..+55 degrees Centigrade
In operation
Temperaturbereich -25..+70 degrees Centigrade
storage/transport
Temperature monitoring integrated
Max. height oft he 2000 m above sea level
operation location
Climatic category 3K3 according to EN 60721-3-3
Air humidity Condensation is not permitted
Corrosion The ambient air must be free from high levels of
acids, lyes, corrosive materials, salt, metal vapors.
Tab. 17: Electrical data
Power supply power Typ. 24 V DC
(US1)
Supply voltage for the Via external 24 V DC power supply unit (PELV)
Bosch Rexroth AG 77/80