Explosion Hazards; Electromagnetic Compatibility (Emc); Cautions - General - Interacoustics AS608 Gebrauchsanweisung

2.3.3 Explosion hazards

2.3.4 Electromagnetic compatibility (EMC)

CAUTION
2.3.5 Cautions – General
CAUTION
AS608 - Instructions for Use - EN
Do NOT use in the presence of flammable gaseous mixtures. Users should
consider the possibility of explosions or fire when using this device in close
proximity to flammable anesthetic gases.
Do NOT use the instrument in a highly oxygen-enriched environment, such as
a hyperbaric chamber, oxygen tent, etc.
Before cleaning make sure to disconnect power source.
Although the instrument fulfills the relevant EMC requirements, precautions
should be taken to avoid unnecessary exposure to electromagnetic fields,
e.g., from mobile phones, etc. If the device is used adjacent to other
equipment it must be observed that no mutual disturbance appears. Please
also refer to the appendix regarding EMC.
Use of accessories, transducers and cables other than specified, with the
exception of transducers and cables sold by Interacoustics or
representatives, may result in increased emission or decreased immunity of
the equipment. For a list of accessories, transducers and cables that fulfil the
requirements please also refer to the appendix regarding EMC.
If the system is not functioning properly, do not operate it until all necessary
repairs are made and the unit is tested and calibrated for proper functioning
in accordance with Interacoustics' specifications.
Do not drop or in any other way cause undue impact to this device. If the
instrument is damaged, return it to the manufacturer for repair and/or
calibration. Do not use the instrument if any damage is suspected.
This product and its components will perform reliably only when operated and
maintained in accordance with the instructions contained in this manual,
accompanying labels, and/or inserts. A defective product should not be used.
Make sure all connections to external accessories are secured properly.
Parts which may be broken or missing or are visibly worn, distorted, or
contaminated should be replaced immediately with clean, genuine
replacement parts manufactured by or available from Interacoustics.
Interacoustics will make available on request circuit diagrams, component
part lists, descriptions, calibration instructions, or other information that will
assist authorized service personnel to repair those parts of this instrument
that are designated by Interacoustics as repairable by service personnel.
No parts of the equipment can be serviced or maintained while in use with
the patient.
Page 8