Skandika Njord Montageanleitung Seite 35

STEP 5
• Fix the computer (A-1) on bracket (R) with cross bolt (A-2) as shown in pic. a.
• Connect the upper computer cable (C-4), lower computer cable (C-5) and lower computer cable I (C-6) to
the computer (A-1) as shown in pic. b.
• Fix the computer (A-1) to computer bracket (C-2) using the screws (N-13) and nylon nuts (N-14).
• The adaptor (S) is connected to the unit at the front end above the stabilizer.
35
SET UP INSTRUCTIONS
D