Sennheiser ew 100 Serie Bedienungsanleitung Seite 80

ew G3 Set BDAs.book Seite 36 Mittwoch, 30. November 2011 5:52 17
Specifications
Mains unit*
Input voltage
Power/current consumption
Output voltage
Secondary output current
Temperature range
* EM 100 G3: NT 2-1 or NT 2-3, depending on country variant; EM 300/500 G3: NT 2-3
SK and SKM
RF characteristics
Modulation
Frequency range "K"
Transmission frequencies
Switching bandwidth
Nominal/peak deviation
Frequency stability
RF output power at 50 :
Pilot tone squelch
AF characteristics
Compander system
AF frequency response
SK
SKM
S/N ratio (1 mV, peak deviation)
THD
Max. input voltage (SK) microphone/line
Input impedance (SK) microphone/line
Input capacitance (SK 100, SK 500 G3)
Adjustment range of input sensitivity
Overall device
Temperature range
Power supply
Nominal voltage
36
NT 2–1
110 V~ or 230 V~,
50/60 Hz
9 VA
13 V
300 mA
–10°C to +55°C
wideband FM
925–932 MHz (see page 4)
280 frequencies, tuneable in steps of 25 kHz
20 fixed frequency banks
6 user-programmable frequency banks
7 MHz
±24 kHz / ±48 kHz
±10 ppm (–10°C to +55°C)
max. 10 mW
can be switched off
Sennheiser HDX
microphone: 80–18,000 Hz
line: 20–18,000 Hz
80–18,000 Hz
SK/SKM 100: t 110 dBA
SK/SKM 300: t 115 dBA
SK/SKM 500: t 115 dBA
d 0.9%
3 V
rms
40 k: unbalanced/1 M:
switchable
SK: 60 dB, adjustable in 3 dB steps
SKM: 48 dB, adjustable in 6 dB steps
–10°C to +55°C
2 AA size batteries, 1.5 V
or BA 2015 accupack
2.4 V
NT 2–3
100 or 240 V~,
50/60 Hz
max. 120 mA
12 V
400 mA
–10°C to +55°C