Sennheiser ew 100 Serie Bedienungsanleitung Seite 72

ew G3 Set BDAs.book Seite 28 Mittwoch, 30. November 2011 5:52 17
Overview of the operating menus
Display Function of the menu item
Main menu "Menu"
Squelch Adjusts the squelch threshold
Adjustment range of the
Adjustment range of the
Special function (for servicing purposes only): With the squelch threshold set to "Low"/
5 dBPV, you switch the squelch off ("Off") by keeping the DOWN button
turning the jog dial
button/turn the jog dial
Easy Setup Scans for unused frequency presets, releases and selects frequency presets
Frequency Preset Changes the frequency bank and the channel
Name Enters a freely selectable name
AF Out Adjusts the audio output level
Adjustment range: -24 dB to +24 dB, adjustable in 3 dB steps, 6 dB gain reserve
Special function "gain reserve":
Equalizer Changes the frequency response of the output signal
Auto Lock Activates/deactivates the automatic lock mode
Advanced Calls up the extended menu
Exit Exits the operating menu and returns to the current standard display
"Easy Setup"
Reset List Releases all locked frequency presets and selects an unused frequency preset
Current List Selects an unused frequency preset
Scan New List Scans for unused receiving frequencies (frequency preset scan)
Exit Exits
28
EM 100 G3: "Off", "Low", "Middle", "High"
EM 300/500
²
to the left and keeping it in this position. If you then press the UP
²
to the right, you switch the squelch on again.
CAUTION! Danger of hearing damage and material damage!
If you switch the squelch off or adjust the squelch threshold to a very low
value, loud hissing noise can occur in the receiver.
The hissing noise can be loud enough to cause hearing damage or
overload the loudspeakers of your system!
Always make sure that the squelch is switched on (see above).
Before adjusting the squelch threshold, set the volume of the audio
output level to the minimum.
Never change the squelch threshold during a live transmission.
When you have adjusted a level of +18 dB, press the UP button
² (EM 300/500
the jog dial G3) to the right and keep it in this position until the next
higher value appears.
"Advanced
"Easy Setup" and returns to the main menu
G3: "Off", 5 to 25 dBPV in 2 dB steps
Menu"
pressed/by
(EM 100 G3)/turn