Risk Of Burns Due To Hot Components And Surfaces; Risk Of Injury In Case Of Improper Work; Availability Of The Operating Instructions - oventrop AQH Betriebsanleitung

Safety-related information
knowledge of the relevant legal regulations, qualified tradespeople are able
to carry out any work on the described product professionally.
User
The user must be informed how to operate the product by qualified trades-
people.
2.3.2

Risk of burns due to hot components and surfaces

f Allow the product to cool down before working on it.
f Wear suitable protective clothing to avoid unprotected contact with hot
system components and fittings.
2.3.3

Risk of injury in case of improper work

Angular components, protrusions and edges both inside and outside the
product may cause injuries.
f Before starting work, make sure that there is enough space.
f Handle open and hard-edged components with care.
f Make sure that the work place is tidy and clean to avoid accidents.
2.3.4

Availability of the operating instructions

Any person working on the product has to read and apply these operating
instructions and all other valid documents (e.g. accessory manuals).
The operating instructions must be available at the installation location of the
product.
f Hand these operating instructions and all other relevant documents (e.g.
accessory manuals) over to the user.
20
Thermostatic valve AQH
118309480-V01.05.2020