Attribute 104, Preset Value Extended (≤ 64 Bit) - TR-Electronic 582 Serie Benutzerhandbuch

Parameterization
8.4.3.30 Attribute 104, Preset Value Extended (≤ 64 bit)
Preset Value Extended is used to set the measuring system value to any position
value within the range of 0 to measuring length in increments –1. The output position
value
Set_Attribute_Single service is executed to this attribute.
ULINT
Byte 0
7
2 to 2
Access
Lower limit
Upper limit
Default
Connection path, Packed EPATH with 8 bit class
0x20
Logical Type
= Class
This attribute is immediately active and saved.
In order to ensure a safe acceptance of the instance attributes
●
●
●
●
changes must be first taken over or saved by means of Attribute 112 Accept
Parameter or the service code 0x16 Save. In a further step the new Preset
value can be written.
 TR-Electronic GmbH 2017, All Rights Reserved
Page 162 of 200
Danger of physical injury and damage to property due to an actual value
jump during execution of the preset adjustment function!
 The preset adjustment function should only be executed when the
measuring system is stationary, or the resulting actual value jump must be
permitted by both the program and the application!
Preset
is set to the
Byte 1 Byte 2
0 15 8 23 16
2 to 2 2 to 2
Set / Get
0
Value within the range from 0 to programmed
measuring length in steps – 1
0
0x23
Logical Type
Class #23
12, Direction Counting Toggle
101, Total Measuring Range
102, Number of Revolutions - numerator and
103, Number of Revolutions - divisor
TR - ECE - BA - DGB - 0135 - 04
value Extended
Preset Value
Byte 3 Byte 4
31 24 39 32
2 to 2 2 to 2
0x24 0x01
Instance #1
= Instance
parameter,
Byte 5 Byte 6
47 40 55 48
2 to 2 2 to 2 2
0x30 0x68
Logical Type
Attr.-ID #104
=Attr.-ID
Printed in the Federal Republic of Germany
03/10/2020
if the
Byte 7
63 56
to 2