Establishing The Bluetooth Connection - Melitta BARISTA SMART T Bedienungsanleitung

Basic operation
Submenus are always called up in a similar
way. Navigation to the Descaling pro-
gramme is described here as an example.
Care
Exit
Rinsing
Easy cleaning
Cleaning milk system
Cleaning coffee system
Descaling
Filter
Fig. 7: Navigating to the Descaling pro-
gramme
1. Press the "menu/ok" button for 2 sec-
onds.
» The menu appears on the display.
2. Use the arrow buttons to select Care
and confirm with "menu/ok".
3. Use the arrow buttons to select Descal-
ing and confirm with "menu/ok".
The selection of functions is always shown
in shortened form in these operating
instructions:
Navigate to the Care > Descaling menu.
ƒ
4.4 Establishing the Bluetooth
connection
Bluetooth connection is required to oper-
ate the appliance by means of a Smart-
phone.
Connecting the appliance for the first
time
Requirements:
ū The appliance is switched on.
ū The Melitta-Connect-App is installed
and open on the Smartphone (see sec-
tion Installing the Melitta-Connect-App,
page 42).
ū The Smartphone is in the reception
range (max. 5 - 10 m away) of the
appliance.
ū The Smartphone supports Bluetooth.
44
ū The Bluetooth function is activated on
the Smartphone.
ū The appliance is not connected to any
other Smartphone via Bluetooth.
ū The appliance is displayed on the
Smartphone.
1. Press the "menu/ok" button for 2 sec-
onds on the appliance.
» The menu appears on the display.
2. Use the arrow buttons to select Blue-
tooth and confirm with "menu/ok".
3. Select Connect on the appliance.
4. Select Connect on the Smartphone and
follow the instructions of the App.
» The appliance is connected to the
Smartphone.
5. Select the Exit command to exit the
menu.
Information
ū If a connection between the appliance
and the Smartphone is not established
within 1 minute, the appliance switches
to the ready to operate display.
ū Only one user can be connected to the
appliance via Bluetooth. If there is a
change of user, the previous user must
disconnect the Bluetooth connection
by closing the App. Only then can the
new user connect to the appliance.
ū Resetting the appliance to the factory
settings deletes all Bluetooth connec-
tions.
Re-connecting the appliance to the
Smartphone
Requirements:
ū The appliance is switched on.
ū The appliance has already been con-
nected to the Smartphone.
ū No other user is currently connected to
the appliance.
1. Open the App on the Smartphone.
» The appliance automatically connects
to the Smartphone via Bluetooth.