Bosch Rexroth PSI 6 C 761 Serie Typspezifische Anleitung Seite 87

R911337026 | PSI6xCx.761xx
Calculation of the factors for monitoring of gun movement
o
adapted.
Object extension for the filter criteria Iterative learning (PSF,
o
UIP...) and for the referencing Phase monitoring gun
resistance adjustment.
Function "Weld time reduction" implemented.
o
Function "Weld time prolongation for STC" updated.
o
Function "Q Logic for tip dress monitoring".
o
Endtime for the spatter detection implemented.
o
Contact wait time will be displayed in the GUI.
o
Contact fault „no sheet contact" will be differenced in sheet-
o
sheet and tip-sheet error.
Fixed error "UIP too high" in case of splitter (time share).
o
Improvement of adhesive contacting, if contact test time was
o
shifted.
• Troubleshooting Sequence Abort measuring circuit test force(display setpoint
and actual values).
• The "Turning point" behavior of the control in the aluminum operating mode
was removed. This led more often to an undefined current behavior.
• The new special connection "Micro-Alu" for micro spot welding of aluminum has
been added. Necessary for a special aluminum application on narrow flanges
with special electrodes.
• Start time of averaging for UIP evaluation adapted. The time is now only
defined by resistance maximum of the reference curve. A start slope used in
the Main-weld time no longer influences the start time.
• Bug fix 'Reference curve invalid after repair of object 1329'.
• Bug fix 'Watchdog error during automatic reweld'.
• Correction of transformer parameters for power class PSI6500L1.
• Bug fixing "sporadic driver error".
• Bug fixing "watchdog error after new spot selection".
• Parameter "force tolerance band" is displayed in BOS6000
• Troubleshooting: Welding warning can be reset even after self-acknowledging
error
• Bug fixing: Status outputs are adjusted immediately when changing UI
parameters
• Discrete inputs I22 and I23 are transparently mirrored to serial outputs O4.13
(61) and O4.14 (62).
• The serial input I2.00 (16) is transparently mirrored to the discrete output O10.
Bosch Rexroth AG 87/89