0Xbe - "Get Device Version - Fronius IG 300 Bedienungsanleitung

Detailed Description of "Inverter Caps" byte:
Bit Meaning
1 Reactive Power Specification
Commands
2 Extended Reactive Power
Specification Commands
3 Extended Reactive Power
Specification
4-7 reserved
0xBE - "Get de- The "0xBE - Get device version" command shows the current hardware and software ver-
vice version" sion of the modules installed in the inverter.
Query:
Start Length Device / Op-
Response:
Start
The reply frame is structured as follows:
[Name of module 1] | [Software version of module 1] | [Hardware version of module 1]
\n...[Name of module n] | [Software version of module n]
| [Hardware version of module n]\0
Reply frame example for an IG Plus 50:
'IG-Brain | 1.4B | 4.25.00
IGP-DISPLAY | 1.1C | 1.00.21
PINCI | 1.1C | 1.04.20'
Detailed Description of Byte Block Counter:
Bit 7
Bit 6 - 0:
The block counter contains a number between 0 and 127. The first reply frame contains
the value 0 as a block counter. Each value received is then increased by 1 per reply frame.
164
Definition
The inverter supports remote-con-
trolled reactive power specification
(only available with Fronius IG Plus
and Fronius CL)
The inverter supports the commands
for extended reactive power specifi-
cation
The inverter supports remote-con-
trolled reactive power specification in
an extended range
Reserved bits for future upgrades
tion
0x00 0x01
Length Device / Op-
tion
0x01
String com- Block
plete Count.
Number Com-
mand
0 - 99 0xBE
Number Com-
mand
0 - 99 0xBE
Checksum
Block Block Block
Count. Count. Count.
Supported value in "Remote
Ctrl CMD ID" of command 0x9F
0x02, 0x03, 0x04
0x05, 0x06, 0x07
-
-
Checksum
Block Substring
Counter
Block Block
Count. Count.
Bit 0
Block
Count.