Safety Devices; Safety And Information Signs - Angelo Po 0N1FR1E Bedienhandbuch

Although the appliance is complete with all sa-
fety devices, during installation and connection
additional devices must be added if necessary
to comply with the relevant legal requirements.
The illustration shows the position of the devi-
ces .
Safety thermostat: cuts off the electricity
A)
supply in case of overheating.
The illustration shows the position of the signs
fi tted on the appliance.
Nameplate with manufacturer and
A)
appliance data.
General hazard: read the manual carefully
B)
before carrying out any procedure.
General hazard: when washing the appliance
C)
do not point pressurised water jets at internal
parts.
General hazard: all relevant regulations must
D)
be complied with. "Install in compliance with
the relevant regulations and use in well venti-
lated premises only".
General hazard: all relevant regulations must
E)
be complied with. "No liability is accepted in
case of failure to comply with the installation
and commissioning instructions".
General hazard: watch out for hot surfaces.
F)
CE marking: this indicates that the equip-
G)
ment is compliant with all relevant laws ap-
plicable to the product.
WEEE symbol: indicates that the appliance
H)
is subject to specifi c waste disposal regula-
tions.
3269930_ut_GB_rev.1

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

- 5 -
C
C
E
D
G
A
H
37M3202 F
C B
GB
ENGLISH