Cleaning The Well, Basket Support And Accessories - Angelo Po 0N1FR1E Bedienhandbuch

– Thoroughly clean all parts which come into
direct or indirect contact with foods and all
surrounding areas.
– After use, clean the accessories with a suitable
grease-remover product. If possible, wash in
the dishwasher.
Caution - Warning
Never use products containing substances
harmful or hazardous for health (solvents,
petroleum spirits, etc.).

CLEANING THE WELL, BASKET SUPPORT AND ACCESSORIES

To carry out this operation, proceed as follows.
Switch the appliance off and leave it to cool.
1)
Turn off the circuitbreaker to disconnect it
2)
from the electrical mains.
Drain and fi lter the oil (see page 11).
3)
Remove and clean the baskets and the basket
4)
support structure (A).
AUse the lever (B) to swing the heating ele-
5)
ments (C) into the vertical position.
GB
Apply a food-grade detergent to the inside of
6)
the well.
Rinse the well with drinking water and drain.
7)
3269930_ut_GB_rev.1
C
A
– Rinse surfaces with drinking water and dry.
– Pressurised water jets may only be used on
external parts.
– Take special care not to damage stainless
steel surfaces. In particular, avoid the use of
corrosive products and do not use abrasive
materials or sharp tools.
– Remove food residues immediately before
they set.
– Remove the limescale deposits which may
form on some of the appliance's surfaces.
Apply a specifi c product or a water and
8)
vinegar solution to the well to remove the
detergent residues.
Rinse, empty and dry the well.
9)
After use, clean the accessories with a suita-
10)
ble grease-remover product. If possible, wash
in the dishwasher.
Important
When using water for routine cleaning, check
that there are no traces of water left in the
well, on the accessories and in the drain line
before refi lling with oil.
B
- 12 - ENGLISH