Technical Data; Safety Devices; Safety And Information Signs - Angelo Po 091FR1IA Bedien- Und Installationshandbuch

See tables and "Connection chart" at the back of
the manual.
Although the appliance is complete with all safety
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
The illustration shows the position of the devices.
A)Gas supply tap: for turning the connection to the
gas supply line on and off.
B)Combustion control unit: cuts off the gas supply if
the flame goes out.
C)Safety thermostat: cuts off the gas supply in case of
overheating
Caution - warning
Make a daily check that the safety devic-
es are properly installed and in good
working order.
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
IT IT
data.
B)General hazard: read the manual carefully before
GB carrying out any procedure.
GB
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
DE DE
D)General hazard: all relevant regulations must be
complied with. "Install in compliance with the rele-
FR
FR
vant regulations and use in well ventilated premises
only".
ES
ES
E)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of fail-
ure to comply with the installation and commission-
ing instructions".
F) Burn hazard: watch out for hot surfaces.
G)CE marking: indicates that the appliance is compli-
ant with the relevant norms.
English

TECHNICAL DATA

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

C
B
A
- 6 -
A
F
D
E
G
C
IDM-39619400300.tif
B