Parkside PLVA 40-Li A1 Originalbetriebsanleitung Seite 28

GB IE
seconds. Keep hands and feet
well away.
• Do not touch the spring tines
before the ignition key has been
pulled, the batteries have been
removed from the device and
the spring tines have come to a
complete standstill.
• Only remove plant parts when the
implement is standing completely
still. Ensure that the grass ejec-
tor opening is clean and free.
• Switch off the power when the
implement is to be transported,
lifted or tilted and when travers-
ing other surfaces than grass.
• Children must never play with
the device.
• Switch off the device and re-
move the ignition key and bat-
teries from the device. Make
sure that all moving parts have
come to a complete stop:
- Whenever you leave the im-
plement
- Before you clean the ejector
opening or unblock or unclog
the implement
- When the implement is not
being used
- Before checking, cleaning or
working on the machine;
- After contact with a foreign
object. Examine the machine
for damage and carry out the
necessary repairs before re-
starting and working with the
machine.
If the machine starts to vibrate
abnormally, an immediate
check must be carried out,
- search for signs of damage;
- have any necessary repairs
carried out on damaged parts;
28
- examine for loose parts and
tighten these.
• Store the implement in a dry
place well out of reach of
children.
CAUTION! The following
states how to avoid damage
to the implement and any re-
sulting harm to people:
Take care of your implement:
• Switch off the power when
the implement is to be carried
across steps.
• Before switching on the ma-
chine, always check whether
all screws, nuts, bolts and other
fasteners are tightly secured and
that the protection devices and
protective gratings are in place.
Worn or damaged labels must
be replaced. Never operate
the implement if safety devices
(e.g. impact protector, parts of
the cutting facility or bolts are
missing, worn out or damaged.
Check especially the starting le-
ver for damage. To avoid imbal-
ance, all tools and bolts must be
exchanged as complete sets.
• Only use spare parts and acces-
sories that have been supplied
or recommended by the manu-
facturer. The use of alien parts
results in the immediate loss of
all guarantee claims.
• Ensure that all nuts, bolts and
screws are firmly tightened and
that the implement is in a safe
working state.
• Never try to repair the imple-
ment yourself, other than you
have been trained accordingly.