7.1.1 Functional overview
The attendant control can be used to operate the driving
function and the electric seat functions.
The module can be connected to the control unit in combi-
nation with the hand control device or separately.
Fig. 36
Attendant control overview
1
On / Off button
2
Battery LED
3
Mode button
4
Mode LED
Skippi
Downloaded from
www.Manualslib.com
5
Display of the selected electric
seat function
6
Joystick
manuals search engine
On/Off button (item 1)
The button is used to turn the power wheelchair on, to acti-
vate the drive-away lock (also see chapter 6.3.6), and to
turn the wheelchair off.
The control panel displays the following after the attendant
control is turned on:
Display symbol
Tab. 5
"Attendant control activated" display
Battery LED (item 2)
The battery LED lights up when the unit is on. Colour and
flash codes provide information on the current battery ca-
pacity status:
LED
Green is lit
Orange is lit
Red is lit
Accessories
Information
Attendant control activated
Status
Battery capacity > 70%
Battery capacity 30% - 70%
Battery capacity < 30%
Ottobock
|
151