Side Panel With Armrest; Removing The Side Panel - Ottobock Skippi Gebrauchsanweisung

Operation
Fig. 16 Loosen the Allen head screws

6.1.3 Side panel with armrest

Removing the side panel with armrest
1. Loosen the thumb screw at the lower end of the side
panel holder.
2. Pull the side panel with armrest up and out.
3. Retighten the thumb screw properly after reinstalling the
side panel.
If the control panel is attached to the armrest, it must be re-
moved before taking the side panel out (chapter 6.1.4).
128 | Ottobock
Downloaded from www.Manualslib.com manuals search engine
Fig. 17

Removing the side panel

Adapting the armrests to the upper arm length
1. Use a size 3 Allen wrench to loosen the set screws.
2. Move the side panel with armrest up or down the rail to
the desired position.
3. Retighten the Allen head screw properly.
Skippi