Function Overview; Attendant Control Overview - Ottobock Xeno Gebrauchsanweisung

Accessories

7.3.1 Function overview

The attendant control can be used to operate the driving
function and the electric seat functions.
The module can be connected to the controller in combina-
tion with the hand control device or separately.
1
Fig. 34

Attendant control overview

1 On/Off button
2 Battery LED
3 Mode button
4 Mode LED
180 | Ottobock
Downloaded from www.Manualslib.com
2 4
3
5
6
5 Display of the selected electric
seat function
6 Joystick
manuals search engine
On/Off button (item 1)
The button is used to turn the power wheelchair on, to acti-
vate the drive-away lock (also see section 6.3.7) and to turn
the wheelchair off.
The control panel displays the following after the attendant
control is turned on:
Display symbol
Tab. 5 „Attendant control activated" display on the control panel
Battery LED (item 2)
When the wheelchair is powered up, the battery LED is illu-
minated. Colour and flash codes provide information on the
current battery charge level:
LED
Green is lit
Orange is lit
Red is lit
Information
Attendant control activated
Status
Battery charge level > 70 %
Battery charge level
30 % – 70 %
Battery charge level < 30 %
Xeno