Appliance Safety - AL-KO Solo 4237 Li P Betriebsanleitung

Safety instructions
■
Use the appliance only for the
purposes for which it is
intended. Any non-intended use
can lead to injury and property
damage.
■
Switch on the appliance only
when there are no other persons
or animals in the working area.
■
Maintain a safe distance to
persons or animals, or switch
off the appliance if persons or
animals approach.

3.5 Appliance safety

■
Use the appliance only under
the following conditions:
The appliance is not soiled.
■
The appliance show no
signs of damage.
■
All controls function properly.
■
Do not overload the device. It
is intended for light work in
the private sector. Overload
can lead to damage to the
appliance.
■
Never operate the appliance
with worn or defective parts.
Always replace defective
parts with original spare parts
from the manufacturer. If the
appliance is operated with
worn or defective parts,
456877_c
■
Repair work is only allowed
be carried out by expert
workshops or our service
■
centres. Make sure that all
nuts, bolts and screws are
tightened and the appliance
in a safe working condition.
■
Regularly check the grass
catcher for wear or loss of
functional capability.
■
Replace worn or damaged
parts due to safety reasons
■
On appliances fitted with
several cutting blades, note
that the movement of one
■
cutting blade can cause the
other cutting blades to rotat
■
When adjusting the
appliance, make sure that
your fingers are not trapped
between moving cutting
blades and stationary parts
■
the appliance.
Allow the motor to cool dow
■
before storing the appliance
When maintaining the cuttin
blades, be aware that the
cutting blades can be move
even when the power supp
is switched off.
3.6
■ Electrical safety
Power tool plugs must matc
the outlet. Never modify the
51