Enabling/Disabling The Hotkey Delay - G&D DLVision-DP Handbuch

Configuration

Enabling/Disabling the hotkey delay

Press the Hotkey+Backspace
onds in order to start the setup mode.
You can disable the hotkey delay if you want to start the setup mode directly after
pressing the key combination.
How to enable/disable the hotkey delay:
ADVICE:
The web application can be used to adjust the delay within a time span
between 1 and 60 seconds.
1. Press the key combination
enable the setup mode.
If the hotkey delay is active, press the key combination during the adjusted time (default:
7 seconds).
2. Press one of the setup keys listed below to enable/disable the hotkey delay:
7  enables hotkey delay (7 seconds)
8  disables hotkey delay
1. Click on KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click the General
4. Use the
Hotkey delay
The maximum time span for the delay is 60 seconds. The value 0 disables the delay.
5. Click to save your changes.
OK
26 · G&D DL-Vision-DP
(default: Ctrl+Backspace
Hotkey+Backspace
tab.
box to enter the desired delay.
) key combination for seven sec-
(default:
in the tree view.
Ctrl + Backspace ) to