Configuration Settings; Enabling/Disabling The Setup Mode - G&D DLVision-DP Handbuch

Configuration settings

Enabling/Disabling the setup mode

NOTE:
This function can only be enabled/disabled via web application.
In the default settings of the KVM extender, the configuration can either be changed
in the setup mode or via web application.
If desired, you can deactivate the setup mode completely.
How to enable/disable the setup mode:
1. Use the tree view to click on
2. Double-click the computer module of the KVM extender to be configured.
3. Click the General
4. Use the field
Setup by keyboard
 enable setup mode
Enabled
Disabled  disable setup mode
5. Click to save your changes.
OK
KVM Extenders > [All Extenders]
tab.
to select between the following options:
Configuration
.
G&D DL-Vision-DP · 25