Changing The Time Span Of The Input Lock - G&D DLVision-DP Handbuch

Configuration

Changing the time span of the input lock

NOTE: This function can only be (de)activated via the web application.
If the user carries out keyboard or mouse inputs at a console, the KVM extender
automatically locks the input devices of the concurrent console. The lock is lifted if
no input is being made at the active console within the adjusted timing of the input
lock (default: 1 second).
After the lock has been lifted, both users can operate the computer again.
The time span of the input lock can be adjusted between 1 and 90 seconds.
How to change the time span of the input lock:
1. Use the tree view to click on
2. Double-click the computer module of the KVM extender to be configured.
3. Click the General
4. Use the field
seconds.
Entering the value »0« disables the input lock.
5. Click to save your changes.
OK
Related topic:
 Exclusive operation of the KVM extender on page 18
30 · G&D DL-Vision-DP
KVM Extenders > [All Extenders]
tab.
Multiuser input lock to enter the time span of the input lock in
.