Time Settings; Language; Factory Settings - TechniSat DIGITRADIO 601 Bedienungsanleitung

Select Allow WiFi connection in standby mode if the WiFi connection
should be retained in standby mode as well. This setting increases power
consumption but enables App control via the TechniSat CONNECT App.

17.3 Time settings

Press the MENU button and then select [Main Menu > System Settings >
>
Time and Date].
If you are in a submenu, select the main menu as described in Section 7.1.
Select [Time/date setting] to set the time and date manually.
>
Use the  or  buttons to select a value. Change it using the  or 
buttons.
Confirm by pressing OK.
>
> Select [Time Updates] to determine whether time updates should be
automatic via DAB, FM or the Internet, or whether you would like to enter it
manually.
> To do so, select [DAB update], [FM update], [NET update] or [No update].
Under the [Set format] option you can activate 12 or 24 hour format.
>
Confirm your selection with the OK button.
> Under [Set time zone], select the current time zone in your location.
Under [Summertime] you specify whether summertime should currently be
>
active.

17.4 Language

> Press the MENU button and then select [Main Menu > System Settings >
Language].
If you are in a submenu, select the main menu as described in Section 7.1.
Using  or , select the language and confirm the selection by pressing OK.
>

17.5 Factory settings

If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device
to factory settings to delete all the saved stations and then launch a new scan.
DE
EN
FR
IT
NL
DA
PL
SK
SL
73