Playing Cds; Setting The Track; Quick Search; Repeat Function - TechniSat DIGITRADIO 601 Bedienungsanleitung

14.3 Playing CDs

> Switch to CD player mode by pressing the MODE button.
[CD] is shown in the display.
>
> Insert the CD with the labelled side facing upwards. Ensure that the CD is not
positioned at an angle. The CD is automatically drawn in by the device.
> The data on the CD is scanned. [Reading] appears in the display. Playback
then begins with the first track (audio CD) or the first track in the first folder
(MP3 CD).
Do not perform any operation until the CD content has been completely read,
to ensure that all the required information on the CD has been read. With
MP3 CDs in particular, this process can take some time.
To insert/remove the CD, please hold it by the edge.
> By pressing the Play/Pause
time appears in the display), or continue playback by pressing it again.
Use the Stop
>
appears in the display.
Always stop the playback prior to removing the CD.

14.4 Setting the track

Use the Previous Track
>
or previous track.
The display shows the respective folder ([F]) and track ([T]) number.

14.5 Quick search

While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
> Hold down the Previous Track
skip forward or back within a track for as long as the button is held down.

14.6 Repeat function

You can select whether a track, the entire folder/album (only for MP3 CDs) or all of
the tracks on the CD are to be repeated.
> Press the Repeat
The selected mode appears in the display using an icon (Repeat Track,
Repeat Album, Repeat All, Shuffle).
68
button, you can pause playback (the playing
button to stop playback. The total number of tracks
or Next Track
button multiple times.
buttons to skip to the next
or Next Track buttons to quickly