Selecting The Programmed Stations; Deleting A Saved Memory Slot; Signal Intensity - TechniSat DIGITRADIO 601 Bedienungsanleitung

> Setting the desired stations.
Press one of the number buttons 1 - 12 and hold it down. [Saved] appears in
>
the display.
> Repeat the process to save other stations.
Alternatively:
> Press and hold the PRESET button on the device, use the SCROLL&SELECT
knob to select a Favourites storage slot and then press the SCROLL&SELECT
knob.

11.6 Selecting the programmed stations

> Press the desired number button 1-12. If no station is saved in the selected
programme slot, [Memory slot empty] appears.
Alternatively:
> Press and hold the PRESET button on the device, use the SCROLL&SELECT
knob to select a Favourites storage slot and then press the SCROLL&SELECT
knob.

11.7 Deleting a saved memory slot

> Save a new station to the respective programme slot.

11.8 Signal intensity

> Press the INFO button as often as required until the signal intensity is shown.
> The bar modulation shows the current level.
Stations with a signal intensity below the required minimum signal intensity
are not transmitting a strong enough signal. If required, align the antenna as
described in Section 6.3.1.
By pressing the INFO button several times, different information can be
scrolled through, such as station type, multiplex name, frequency, signal error
rate, data bit rate, station format, date.
62
Minimum signal strength
Signal strength