Siemens SIMOVERT MASTERDRIVES Betriebsanleitung Seite 314

Faults and Alarms
Number / Alarm
A216
Multiple block transition
not allowed
A217
Multiple axis
programming not
allowed
A218
Multiple path condition
not allowed
A219
Multiple dimensions
specification not
allowed
12-32
Downloaded from www.Manualslib.com
Cause
The decoded NC block contains several
mutually exclusive G functions from the block
transition group (G60, G64, G66, G67).
Example:
N1 G64 G66 X1.000 FX100.00
The NC program number and NC block
number in which the NC block decoder
detected the error can be read out with the
"output actual values - decoder error location"
task.
Effect:
NC program execution is inhibited or aborted,
the axis is brought to a standstill via the
deceleration ramp.
The decoded NC block contains the same axis
more than once.
Example:
N1 G90 G01 X100.000 X200.000 F100.00
The NC program number and NC block
number in which the NC block decoder
detected the error can be read out with the
"output actual values - decoder error location"
task.
Effect:
NC program execution is inhibited or aborted,
the axis is brought to a standstill via the
deceleration ramp.
The decoded NC block contains several
mutually exclusive G functions from the
preparatory function group
(G00/G01/G76/G77).
Example:
N1 G01 (linear interpolation) G77 (chaining)
X10 F100.
The NC program number and NC block
number in which the NC block decoder
detected the error can be read out with the
"output actual values - decoder error location"
task.
Effect:
NC program execution is inhibited or aborted,
the axis is brought to a standstill via the
deceleration ramp.
The decoded NC block contains several
mutually exclusive G functions from the
dimensional notation group (G90/G91).
Example:
N1 G90 G91.
The NC program number and NC block
number in which the NC block decoder
detected the error can be read out with the
"output actual values - decoder error location"
task.
Effect:
NC program execution is inhibited or aborted,
the axis is brought to a standstill via the
deceleration ramp.
manuals search engine
Counter-measure
Correct the NC block.
Correct the NC block.
Correct the NC block.
Correct the NC block.
6SE7087-6JD50
Operating Instructions SIMOVERT MASTERDRIVES
08.2009
Siemens AG