Siemens SIMOVERT MASTERDRIVES Betriebsanleitung Seite 179

08.2009
Mounting
G-type rail according to EN50035
G-type rail according to EN50035
Siemens AG
SIMOVERT MASTERDRIVES
Downloaded from www.Manualslib.com
The unit is mounted directly to a mounting surface, for which you
require the following:
♦ G-type mounting rail according to EN50035 with screws for fixing at
the top
♦ One M6 screw for types A to C, two M6 screws for type D, for fixing
at the bottom
♦ Dimension drawing for types A, B and for types C, D.
350 mm
Side view
Fig. 5-2
Mounting surface
350 mm
Side view
Fig. 5-3
Siemens Controls
6SE7087-6JD50
Operating Instructions
manuals search engine
Mounting surface
Cutouts for
M6 screws
45 mm
90 mm
Type A
Front view (without front panel)
Dimension drawings for installation of types A, B
Cutouts for
M6 screws
90 mm
180 mm
Type C
Front view (without front panel)
Dimension drawings for installation of types C, D
Installation
67.5 mm
135 mm
Type B
45 mm
180 mm
270 mm
Type D
5-3