ter window change to fix display calories, press START/PAUSE
key,the motor start form 1.0km/h, the speed will increase slowly
until the value as the display in the window ,the calories will count
up.
10 if the value no setting will counter up.
7: PROGRAM MODE:
1 initial setting time is 30mins, press speed up or down key to
adjust value.
2 press START/PAUSE key, the motor will start to run, speed
according to the inner setting value of program.
3 press speed up or down key can adjust speed.
4 press SPEED shortcut key can set speed as the setting value
from speed key.
5 each program is 10 speed level
6 press START/PAUSE key, the speed will slow down until stop.
7 press START/PAUSE key , the speed will increase slowly until
the value as the display in the window from 1.0KM/H.
8 only can set time, the setting time range: 10:00—99:00 min
9 When the setting time count down to zero, the speed will
slow down until stop the buzzer beep each one second for five
times,then the center window change to fix display time, press
START/PAUSE key,the motor start form 1.0km/h, the speed will
increase slowly until the value as the display in the window .When
the time count up ,each inner setting value of time can function for
1:30 and it will function again each half hour.
10 Put the safety key out from faceplate,the motor will stop quic-
kly, the speed window display „- - -", the buzzer beep one second.
Put the safety key into faceplate, it will then enter normal manual
mode. All parameter reset to zero.
PROGRAM SPEED TABLE:
P1
P2
S1
1.0
1.0
S2
1.5
2.0
S3
2.5
2.0
S4
3.5
3.0
S5
4.5
3.0
S6
4.5
4.0
S7
3.5
4.0
S8
2.5
5.0
S9
1.5
5.0
S10
1.0
1.0
Function of safety key
Put the safety key out from faceplate on any status, the speed
window display is „- - -", the buzzer beep one second. Put the
safety key into faceplate, then it will enter normal manual mode.
All parameter reset to zero.
FAT TESTING:
1: When the motorized treadmill stop , press program key can se-
lect body fat.
2: the pulse window display setting value.
3: After enter the function of body fat testing, it expresses sex
,pulse window display 01for man,press speed up or speed down
key to select 01(man)or 02(woman)
4: press mode key to enter the setting of age ,pulse window dis-
play 30 (years old),press speed up or speed to set age (age ran-
ge:1-99).
5: press mode key to enter the setting stature ,pulse window dis-
P3
P4
P5
1.0
1.0
1.0
3.0
4.0
3.0
6.0
6.0
6.0
3.0
8.0
3.0
6.0
6.0
2.0
6.0
5.0
3.0
3.0
4.0
6.0
6.0
3.0
3.0
3.0
2.0
2.0
1.0
1.0
1.0
play 170(mm),press speed up or speed down to adjust range of
stature(range:100-200mm)
6: press mode key to enter the setting weight,pulse window dis-
play 70(kg),press speed up or speed down to adjust weight(weight
range: 20-200kg)
7: press mode key to enter the setting body fat testing,pulse win-
dow display 00(xx%),the user must put two hands on pulse sensor
for 8 seconds, the pulse window will display body fat testing value.
P6
1.0
3.0
6.0
8.0
8.0
8.0
8.0
6.0
3.0
1.0
20