Christopeit Sport LB1 Montageanleitung Und Bedienungsanleitung Seite 16

Assembly Instructions
Before beginning assembly, be sure to observe our recom-
mendations and safety instructions.
Put the preassembled machine out of carton and place the base
frame on an even floor.
Step 1:
1. Put the 4 foot pads (23) onto the backside of base frame (22).
Step 2:
1. Place the lift post (10R) with computer cable (9) to the bottom
frame (22) on right side and connect the computer cables 2+3
(9+34).
2. Put both lift posts (10R+10L) on bottom frame (22) that screw
holes are aligned and bolt it together by using screws (17) and
washers (18+19).
3. Place the connection tube (15) between the lift posts (10L+10R)
and fasten the connection tube (15) at lift posts (10) with screw
(16) tightly.
Step 3:
1. Place the computer (1) onto the ends of handle bars (10L+10R)
and connect the computer cables 1+2 (6+9), both pulse cables
(4+8) and distant key cables (7+5).
2. Attach the computer (1) at handle bars (10) with screws (3) and
take care that the cables won't be squashed.
3. Put the bottle holder (77) into the computer housing (1)
16