Specifications - Ingersoll-Rand 231-Serie Betriebshandbuch

Ingersoll- - Rand No. 50
Always use of an air line lubricator. We recommend the
following Filter- - Lubricator- - Regulator Unit:
For International- - No. C28- - C4- - FKG0
For USA - - No. C28- - 04- - FKG0- - 28
After each forty- - eight hours of operation, or as
experience indicates, inject about 4 cc of the
recommended grease into the Grease Fitting (3).
231
231- - 2
H
♦ Tested to ISO8662- - 1 loaded with frictionbrake to 9 RPM
•
Downloaded from www.Manualslib.com
PLACING TOOL IN SERVICE
LUBRICATION
Ingersoll- - Rand No. 100
Model Type of Drive
Handle
in.
pistol 1/2" sq.
pistol 1/2" sq. with
extended
anvil
Tested in accordance with ANSI S5.1- - 1971 at free speed
ISO3744
231
manuals search engine
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY

SPECIFICATIONS

Impacts Recommended
per min. Torque Range
ft- - lbs (Nm)
1,200 25- - 300
(34- - 407)
1,200 25- - 300
(34- - 407)
TPD1884
3 Letter
Date Code
location
A __ __
3
FILTER
COMPRESSOR
(Dwg. TPD905- -1)
Sound Level
♦Vibrations
H
dB (A) Level
Pressure • Power m/s
102.0 115.0 5.2
102.0 115.0 4.2
2