Specifications - Ingersoll-Rand 2705A1 serie Gebrauchsanweisung

LUBRICATION
Ingersoll–Rand No. 50
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–Regulator
Unit:
For International – No. C28–C4–FKG0
After each forty–eight hours of operation, or as experience
indicates, inject about 4 cc of Ingersoll–Rand No. 100 Grease
into the Grease Fitting.
Model Type of
Handle
2705A1 pistol
H
Tested in accordance with ANSI S5.1–1971 at free speed
♦ Tested to ISO8662–1 loaded with frictionbrake to 9 RPM
PLACING TOOL IN SERVICE
Ingersoll–Rand No. 100

SPECIFICATIONS

Drive Impacts per
min.
in.
1/2" sq. 1200
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
Recommended
Torque Range
ft–lbs (Nm) Pressure
40–200 (54–271)
83.7
3
FILTER
COMPRESSOR
(Dwg. TPD905–1)
♦
HSound
Vibrations
Power Level
dB (A)
Power
– – –
Level
2
m/s
3.7