Turning On The Power - Christie LW502 Bedienungsanleitung (Kurzform

Turning on the power

1.
Make sure that the power cord is firmly and correctly connected to the
projector and the outlet.
2.
Make sure that the POWER indicator
is lighted in steady orange. Then
remove the lens cover.
3.
Press the STANDBY/ON button on
the projector or the remote control.
The projection lamp lights up and the
POWER indicator begins blinking in green.
When the power is completely on, the
indicator stops blinking and light in steady
green.
WARNING ►A strong light is emitted when the projector's power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector's openings, as the projection ray may cause a trouble on your
eyes.
►Blocking the beam can cause high temperatures to occur and may result in
smoke or fire.
NOTE • Power on the projector prior to any connected devices.
• The projector has the DIRECT POWER ON function, which makes the
projector automatically turn on. For more information, see User's
Manual - Operating Guide.
LW502/LWU502/LX602 Setup Guide
020-001101-03 Rev. 1 (02-2018)
STANDBY/ON button
POWER indicator
INPUT
1
ASPECT PbyP
MAGNIFY FOCUS
ON
OFF
PAGE
UP GEOMETRY
DOWN INTERACTIVE
ESC
OSD MSG
MYBUTTON
2
INPUT MYBUTTON
1 2
ASPECT PbyP AUTO FREEZE
MAGNIFY FOCUS ZOOM VOLUME
ON + + +
AUTO FREEZE
OFF - - -
PAGE
UP GEOMETRY PICTURE MUTE
DOWN INTERACTIVE NETWORK BLANK
ESC MENU
ZOOM VOLUME
+ + +
ENTER
OSD MSG RESET
- - -
PICTURE MUTE
NETWORK BLANK
MENU
ENTER
RESET
12