Fastening The Adapter Cover - Christie LW502 Bedienungsanleitung (Kurzform

Fastening the adapter cover

When using the USB wireless adapter, use the supplied adapter cover for theft
prevention.
USB wireless adapter: USB-WL-11N-NS
Loosen the screw on the bottom left of the WIRELESS port.
1.
Insert the tab of the cover into the hole at the upper right of the WIRELESS
2.
port in the direction of the arrow.
Align the screw holes on the projector and the cover. Then insert the screw
3.
removed from the projector into the hole and tighten the screw.
WARNING ►Keep small parts away from children and pets. Take care not
to put in the mouth.
►Heat may build up in the USB wireless adapter, to avoid possible burns
disconnect the projector power cord for 10 minutes before touching the adapter.
LW502/LWU502/LX602 Setup Guide
020-001101-03 Rev. 1 (02-2018)
Temperature range: 0 ~ 40°C (operating)
Tab
9