Graduated Scale On The Hand Wheel - Dürkopp Adler M-Type 869 Serviceanleitung

1.3 Graduated scale on the hand wheel

The hand wheel 2 is printed with graduated numbers.
Specific settings are configured using these hand wheel settings.
–
Turn the hand wheel until it reaches the graduated figure specified
in these instructions on the indicator 3.
–
Set as described.
Setting the hand wheel
–
Move the machine to position II with the Ø 3 mm locking pin.
–
Undo the hand wheel fixing screws through hole 1.
–
Turn the hand wheel until the number "0" shows on the indicator 3.
–
Screw in the first fixing screw again.
–
Turn the hand wheel 50° and screw in the second fixing screw.
1
2
3
GB
5