Stitch Length Limitation - Dürkopp Adler M-Type 869 Serviceanleitung

2.9 Stitch length limitation

3 2 1
Depending on the sewing equipment used the stitch length setting
must be limited to 6 or 9 mm.
–
Remove screw 2 on the stitch length adjustment wheel.
–
Take out adjustment wheel 1.
–
Unscrew grub screw 4 and screw it into the corresponding hole.
The holes have numbers.
For 6 mm = screw in hole 8
For 9 mm = screw in hole 12
–
Configure as in chapter 2.3.1 "Basic stitch adjustment setting".
–
Put the adjusting wheel on and fix with screw 2.
4
GB
29