Mounting The Knee Lever - Dürkopp Adler M-Type 869 Serviceanleitung

9.

Mounting the Knee Lever

2
5 4
7
22
1
The sewing feet can be lifted mechanically by the knee lever 1.
Attach the knee lever 1.
–
Position the knee lever from below so that the nose 2 points to the
front.
–
Tighten screw 3 into the machine base.
Aligning the knee lever
–
Loosen screws 4 and 5.
–
Align the knee lever.
–
Re-tighten screws 4 and 5.
Aligning the knee cushion
–
Loosen screw 6.
6
–
Align the knee cushion 7.
–
Re-tighten screw 6.
3