Program Mode - Christopeit Sport RUNNER PRO I loopband Montageanleitung Und Bedienungsanleitung

9 When the setting calories count down to zero, the speed will
slow down until stop the buzzer beep each one second for fi ve
times,then the center window change to fi x display calories, press
START/STOP key,the motor start form 1.0km/h, the speed will in-
crease slowly until the value as the display in the window ,the ca-
lories will count up.
10 if the value no setting will counter up.

PROGRAM MODE:

1 initial setting time is 30mins, press speed up or down key to
adjust value.
2 press START/STOP key, the motor will start to run, speed accor-
ding to the inner setting value of program.
3 press speed up or down key can adjust speed.
4 press SPEED shortcut key can set speed as the setting value
from speed key.
5 each program is 20 speed level
6 The buzzer will beep for 3 seconds before the change of different
speed levels.
7 press START/STOP key, the speed will slow down until stop.
8 press START/STOP key , the speed will increase slowly until the
value as the display in the window from 1.0KM/H.
9 only can set time, the setting time range:8:00—99:00
10 When the setting time count down to zero, the speed will
slow down until stop the buzzer beep each one second for fi ve
times,then the center window change to fi x display time, press
START/STOP key,the motor start form 1.0km/h, the speed will in-
crease slowly until the value as the display in the window .When
the time count up ,each inner setting value of time can function for
1:30 and it will function again each half hour.
11 Put the safety key out from faceplate,the motor will stop
quickly, the speed window display E07,the buzzer beep each
second(the data of other windows won't change) Put the safety
key on faceplate,all segment of LED light for 2 seconds, then enter
normal manual mode. All parameter reset to zero.
PROGRAM SPEED TABLE:
P1 P2
S1 1.0 1.0
S2 1.5 2.0
S3 2.5 2.0
S4 3.5 3.0
S5 4.5 3.0
S6 4.5 4.0
S7 3.5 4.0
S8 2.5 5.0
S9 1.5 5.0
S10 1.0 1.0
Function of safety key
Put the safety key out from faceplate on any status, the speed
window display is E07,the buzzer beep each second(the data of
other windows won't change) Put the safety key on faceplate,all
segment of LED light for 5 seconds, then it will enter normal ma-
nual mode. All parameter reset to zero.
FAT TESTING:
1: When the motorized treadmill stop , press program key can se-
lect body fat.
2: the pulse window display setting value,the speed window dis-
play setting function.
3: After enter the function of body fat testing,the speed window dis-
play "01",it expresses sex ,pulse window display 01for man,press
speed up or speed down key to select 01(man)or 02(woman)
4: press mode key ,speed window display 02 to enter the setting
of age ,pulse window display 25(years old),press speed up or
speed to set age (age range:1-99).
P3 P4 P5
1.0 1.0 1.0
3.0 4.0 3.0
6.0 6.0 6.0
3.0 8.0 3.0
6.0 6.0 2.0
6.0 5.0 3.0
3.0 4.0 6.0
6.0 3.0 3.0
3.0 2.0 2.0
1.0 1.0 1.0
5: press mode key ,speed window display 03 to enter the setting
stature ,pulse window display 170(mm),press speed up or speed
down to adjust range of stature(range:100-200mm)
6: press mode key ,speed window display 04 to enter the set-
ting weight,pulse window display 70(kg),press speed up or speed
down to adjust weight(weight range:20-150kg)
7: press mode key ,speed window display 05 to enter the setting
body fat testing,pulse window display 00(xx%),the user must put
two hands on pulse sensor for 8 seconds, the pulse window will
display body fat testing value.
P6
1.0
3.0
6.0
8.0
8.0
8.0
8.0
6.0
3.0
1.0
20