5.8.9.6 Setting Time Offset
Procedure Steps
1
From the home screen, press MENU key.
2
Select Setup → Time & Date → Set → Time Offset.
Enter time offset using NAVIGATION keys.
3
You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or behind.
4
Press Done.
5.8.9.7 Setting Automatic Update for the Time and Date
Procedure Steps
From the home screen, press MENU key.
1
2
Select Setup → Time & Date → System Update.
Select one of the following:
3
• Off — All the infrastructure informations are ignored. The radio uses internal time and offset.
• Time Only — Time displayed is calculated from the offset programmed by your service provider
added or subtracted from the infrastructure time.
• Time & Offset — Time and offset are updated after receiving from the infrastructure.
5.8.10 Energy Economy
Energy Economy (EE) is a mode of operation to save battery life. Your radio does not monitor all downlink time
slots of the Main Control Channel. If the radio is in the charger, Energy Economy mode is not needed.
-
5.8.9.6 Setting Time Offset
5-47