Setting Time And Date; Setting Time Format - Motorola MTM800 Bedienungsanleitung

Scroll to the desired setting and press Set. Press Back to
exit.
Time and date are synchronized by the infrastructure. When not
within the infrastructure signal range you can set the values
manually.

Setting Time and Date (

To set time and/or date:
1. Enter the Setup menu.
2. Select Time & Date, and press Ok.
3. Select Set, and press Ok.
Enter time using navigation keys or 2(Up), 8(Down), 4(Left),
6(Right) keys from the alphanumeric keypad and press Set.
Press Back to exit.
Setting Offset (
To set local time offset:
1. Enter the Setup menu.
2. Select Time & Date, and press Ok.
3. Select Time Offset, and press Ok.
Enter offset value using navigation keys or 2(Up), 8(Down),
4(Left), 6(Right) keys from the alphanumeric keypad and
press Set. Press Back to exit.
You can adjust the offset value, with 15 minute steps, up to 14
hours ahead or behind.

Setting Time Format (

To change displayed time format between 24-hour scale and
12-hour scale:
1. Enter the Setup menu.
2. Select Time & Date, and press Ok.
3. Select Format Time, and press Ok.
Choose required setting and press Set. Press Back to exit.
88
4 5 2)
Menu
4 5 3)
Menu
4 5 4)
Menu