Home Mode Display; Time & Date; Terminal Disable/Enable - Motorola MTM800 Bedienungsanleitung

One-touch Private Call is set by the Service Provider.
1. If it is set to Simplex, then outgoing Private Call is Simplex
too.
2. If it is set to Duplex, then outgoing Private Call can be
duplex in TMO, Simplex in DMO with the last Group Call
Originator number.
3. If it is set to Duplex, then outgoing Private Call can be
duplex in TMO and cannot be initiated in DMO when the
phone book index is required.

Home Mode Display

Your MTM800 is provided with a feature that allows your
Service Provider to send special text messages to your
MTM800 display.
The message is displayed several seconds
after any key press.
If configured by your Service Provider,
your MTM800 will display an internal Home
Mode Display until another message is received.
This feature is used as a special reminder message to the user.
Typically this would consist of a call sign, or work dispatch
reference number, or even for a train run number or bus route
number. New messages can be updated "over the air".
Time & Date
If your Service Provider configured this feature, you can
check time and date, wherever in menu, by pressing relevant
one-touch button.
Check in the menu options whether the Service Provider has
given you the capability of customising time and date
settings.

Terminal Disable/Enable

Your MTM800 is provided with a feature that allows your
Service Provider to disable it temporarily (in case it is stolen
or lost) wireless.
Range 1
<HomeModeDispTxt>
19