Dgna Auto Select Group - Motorola MTM800 Bedienungsanleitung

DGNA Reception without Notification Message
If DGNA notification was not configured by your Service
Provider, you will get a tone indication and notification
message only and only if a selected group was changed by
the DGNA.

DGNA Auto Select Group

If DGNA Auto Select was configured by your Service
Provider, whenever a DGNA message is received by your
terminal, the talkgroup will automatically be made the
selected group by your terminal.
Button/Footswitch
This feature provides to the user ability to send provisioned
status message by pressing Emergency button/footswitch.
TMO Emergency mode, Emergency Alarm and initiating
TMO Emergency Group/Private call is unavailable.
Message addressing and sending:
• address can be predefined by Service Provider if not it will
be send to currently selected group
• if no group selected the message will be send to reserved
address
• message will be send even if the user is involved in any
active service.
Indication depend on Service Provider. Visible/audible can be
disabled for the status message.
When the radio is PIN locked the user can still press the
Emergency button/footswitch to send the message. If the
radio is out of service the user will only see indication that
operation failed.
40