Setting Language; Data Setup; Setting Data Function; Audio - Motorola MTP850 FuG Ausführliche Bedienungsanleitung

Feature User Guide

5.8.4.1 Setting Language

Procedure Steps
1 From the home screen, press MENU key.
2 Select Setup → Language.
3 Select desired language.

5.8.5 Data Setup

This menu item allows you to set up your radio to transmit and receive data from the external device.
To connect your radio accessory connector to the external device, use cable FKN4897. The external device must run
an application complying with the TETRA standards.
• Data services are available only in TMO Mode.
• Data services are blocked in TXI Mode.
• When set to Voice Only, the built in data modem is disabled to conserve battery power.

5.8.5.1 Setting Data Function

Procedure Steps
1 From the home screen, press MENU key.
2 Select Setup → Data Setup.
Select one of the following:
3
• Voice Only — Your radio receives and transmits voice calls only.
• Data Only — Your radio acts as a modem. It rejects incoming and outgoing voice calls (except for
Emergency Calls), status and text messages.
• Voice & Data — Your radio acts as a modem but voice calls have priority over data calls and can
interrupt them.

5.8.6 Audio

This menu item allows you to adjust your radio audio settings.
5-34 -