Description Of The Seeder; Technical Data - Gaspardo MAGICA Gebrauch Und Wartung

ENGLISH

3.0 DESCRIPTION OF THE SEEDER

The «MAGICA-MAGA» model is the GASPARDO planting unit that best expresses the objectives of modern agriculture: high yields at
low cost. With its technical characteristics, it uses rolling parts only, it offers high quality performance on both prepared soils (traditional
seed planting) and soils with minimum tillage or with crop residues. Its main characteristic is based on the determination of seed planting
depth at the seed drop point, obtained by means of a pair of level wheels.
The frame used on the MAGICA-MAGA model allows the sowing line spacing (row distance) to be changed quickly and easily.
This agricultural equipment, can only operate by means of a Cardan shaft applied to the power take-off of an agricultural tractor equipped
with a lifting unit, with a three-point universal joint.
It can be equipped with various accessories, for example, with fertilizer spreader and microgranulator.
There are, more over, varius types of electronic instruments for seeding control and for calculating the area seeded (Ha).
The seeder is suitable only for the uses indicated. The recommended working speed is 6÷8 km/h. The planting unit must only
be transported by road with the tanks and hoppers empty and at max speed of 25 km/h.
Operating instructions
• The machine was manufactured for dosing and distributing commercial seeds of standard quality.
• The machine is intended for professional users: operation must be allowed to skilled operators only.
• The machine must be operated by one operator only.
• The machine is not intended for purposes other than farming applications.
Conforming machine operation also includes:
• compliance with all the instructions provided in this manual;
• performance of inspection and maintenance operations described in this manual;
• exclusive use of genuine GASPARDO spare parts.
Below is a list of precautions for use the machine:
• ensure that there are no remarkably big stones or rocks on the soil;
• ensure that there are no metal elements of any type whatsoever, but especially nets, cables, wire ropes, chains, pipes, etc. on the soil.

3.1 TECHNICAL DATA

Max. row number
Row distance
Toolbar width
Seed hopper capacity
Fertilizer hopper capacity
PTO (rpm)
Weight (*)
Working speed (max)
No-load noise detection (**)
Tyres
Tyre in ation pressure
Dimensions ( g. 5)
TRACTOR SPECIFICATIONS
Power required
Three- point universal joint (category)
Battery voltage
Tractor hydraulic connections (min.)
Tractor pump pressure (max)
(*) With fertilizer and microgranulator.
(**) L = Acoustic power level uttered by machine (Weighed A);
WA
L = Continuous equivalent acoustic radiation pressure level (Weighed A) in the "worker's position".
pA
The technical data and the models provided must be considered as non binding. We reserve the right to change them without notice.
50 - EN
USE AND MAINTENANCE
ATTENTION
U.M.
8
[nr.]
45-50-60-70-75
[cm]
3,00
[m]
[l]
[l]
[g.p.m.]
[kg] 1910
[Km/h]
[dB]
[Type]
[bar-(Psi)]
(A) [cm] 300
(B) [cm] 330
(C) [cm] 200
[HP-(kw)] 100-(74) 100-(74)
[nr.]
[V]
[nr.]
[bar]
MAGICA
8 9 (8)
45-50-60 (70-75-80)
3,20 3,20
36
400
540
1940 2050 2540
6÷8
(L = 112,7) - (L
WA
22x11.00-10 Tubeless
2,4 - (34.8)
320 320
330 330
200 200
120-(90) 130-(97) 130-(97)
II
12
1
180
MAGA
8 8 9
45-50-60-70-75 45-50-60 (70-75-80)
3,00 3,20 3,20
36
400
540
2600 2700
6÷8
= 91,7)
pA
300 320 320
330 330 330
240 240 240
150-(112)
II ( III N)
cod. G19503301
(8)