Information By The Charger; In Power Voltage - VOLTCRAFT B6 Dual Power Bedienungsanleitung

18. Information by the charger

Various information is indicated on the display during a charge/discharge process by repeatedly
pressing the button "DEC".
End Voltage End Voltage End Voltage
End Voltage End Voltage
12.6V(3S) 12.6V(3S)
12.6V(3S) 12.6V(3S) 12.6V(3S)
Capacity Cut-OFF Capacity Cut-OFF Capacity Cut-OFF
Capacity Cut-OFF Capacity Cut-OFF
ON ON
ON ON ON
Safety Timer Safety Timer
Safety Timer Safety Timer Safety Timer
ON ON ON
ON ON
USB/Temp Select USB/Temp Select
USB/Temp Select USB/Temp Select USB/Temp Select
USB USB USB
USB USB
Ext.Temp Ext.Temp Ext.Temp
Ext.Temp Ext.Temp

IN Power Voltage

IN Power Voltage IN Power Voltage
IN Power Voltage IN Power Voltage
With the "INC" button, you can switch to the display of the voltage in the individual cells (this
only makes sense if the balancer connections are used with lithium accumulators).
Example of a 3-cell LiPo accumulator:
4.14 4.14 4.14 4.16 4.16 4.16
4.14 4.14 4.16 4.16
0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00
5000mAh 5000mAh
5000mAh 5000mAh 5000mAh
200min 200min 200min
200min 200min
Enabled Enabled Enabled
Enabled Enabled
26C 26C 26C
26C 26C
12.56V 12.56V
12.56V 12.56V 12.56V
4.09 4.09 4.09
4.09 4.09
0.00 0.00
0.00 0.00 0.00
Voltage of the accumulator at the end of charging/
discharging
Accumulator capacity for safety cutoff
Time for safety timer
Operating mode of the 3-pole connector (USB or
temperature sensor)
Temperature measured by the external temperature
sensor (not part of the delivery)
Input voltage
89