Information (Information) - Yamaha RX-V4600 Bedienungsanleitung

USING i.LINK

■ Information (Information)

Use this feature to display the following information:
operation status of registered i.LINK components,
registered i.LINK components that have been deleted, and
i.LINK signals that are currently being received.
i.LINK Select > Information >
Choices: Details, Delete, Protect, i.LINK Status
• Select Details to display the following information
about the selected i.LINK component.
– Vendor: Displays the name of the manufacturer for
your i.LINK component.
– Model: Displays the model name of your i.LINK
component.
– Active (connected) or Non Active (not
connected): Displays depending on whether your
i.LINK component is connected.
– Audio (for audio signals) or Non Audio (for non-
audio signals): Displays depending on whether your
i.LINK component supports audio signal playback.
– Assign: Displays the name of the input assigned to
the selected i.LINK component.
• Select Delete to delete the selected i.LINK component
from the registered components list. To delete, press
ENTER. You can only delete non-active and
unprotected i.LINK components.
• Select Protect to protect the selected i.LINK
component from being accidentally deleted.
• Select i.LINK Status to display operation status of
i.LINK signals that are currently being received. You
can also use this feature to delete all non-active and
unprotected i.LINK components together at once.
Note
Information about unregistered i.LINK components is not
available in the GUI menu. These i.LINK components cannot be
used on this unit although they can be output to other i.LINK
components.
■ Select (Input select)
Use this feature to select which registered i.LINK
component's audio signal will be selected for playback.
i.LINK Select > Select >
Select the name of the desired component and press
ENTER to switch the input. When you select the desired
component, its manufacturer and model information
appear along with its input assignment.
94
■
Input Assign (Input assign)
Use this feature if you want to change the input
assignment of a registered i.LINK component. You can
select to assign the i.LINK component to any of the
various inputs (PHONO to V-AUX).
i.LINK Select > Input Assign >
Choices: PHONO, CD, CD-R, MD/TAPE, DVD, DTV,
CBL/SAT, VCR 1, DVR/VCR 2, V-AUX,
No Assignment
1
Press k / n repeatedly to select the i.LINK
component you want to assign, then press
h.
2
Press k / n repeatedly to select the input for
the i.LINK component, then press ENTER.
y
This menu item is also available in the front panel display system
options menu (see page 91).
■ Auto Play (Auto Play)
Use this feature to turn on/off automatic playback when an
i.LINK component is selected using the INPUT selector or
to select whether you want the input to switch
automatically when an input stream from a connected
i.LINK component is detected.
i.LINK Select > Auto Play >
Choices: ← – → Player, → → → Player, ← ← ← Player,
– X – Player
• Select ← – → Player if you want both playback to start
automatically on the i.LINK component selected using
the INPUT selector, and you want this unit to
automatically switch its input to the i.LINK component
which has started playing back.
• Select → → → Player if you want playback to start
automatically on the i.LINK component selected using
the INPUT selector.
• Select ← ← ← Player if you want this unit to
automatically switch its input to the i.LINK component
which has started playing back.
• Select – X – Player to disable automatic playback for
the i.LINK components. This setting also prevents this
unit from automatically switching its input to the
i.LINK component.
y
This menu item is also available in the front panel display system
options menu (see page 91).