Yamaha RX-V4600 Bedienungsanleitung Seite 67

SWFR Phase (Subwoofer Phase)
If bass sounds are lacking or unclear, use this feature to
adjust the frequency phase characteristics of your
subwoofer.
Choices: Normal, Reverse
Bass Out
Bass Cross Over
SWFR Phase
• Select "Normal" not to reverse the phase for your
subwoofer(s).
• Select "Reverse" to reverse the phase for your
subwoofer(s).
y
This menu item is also available in the front panel display system
options menu (see page 89).
■ Speaker Distance (Speaker distance)
Use this feature to manually input the distance of each
speaker and adjust the delay applied to the respective
channel. Ideally, each speaker should be the same distance
from the main listening position. However, this is not
possible in most home situations. Thus, a certain amount
of delay must be applied to the sound from each speaker
so that all sound will arrive at the listening position at the
same time.
Manual Setup > Basic > Speaker Distance >
Test Tone
Speaker Set
Speaker Distance
Speaker Level
THX Set
Unit (Unit)
Choices: Meter (m), Feet (ft)
Initial setting:U.S.A. and Canada models: Feet (ft)
Other models: Meter (m)
• Select "Meter" to input speaker distances in meters.
• Select "Feet" to input speaker distances in feet.
Presence R
Subwoofer
Unit
Front L
Front R
Normal
Reverse
Subwoofer
Unit
Front L
Front R
Center
Meter
Feet
Speaker distances
Choices: 0.30 to 24.00 m
Initial setting: 3.00 m
• Front L adjusts the distance of the front left speaker.
• Front R adjusts the distance of the front right speaker.
• Center adjusts the distance of the center speaker.
• Surround L adjusts the distance of the surround left
speaker.
• Surround R adjusts the distance of the surround right
speaker.
• Surround Back L adjusts the distance of the
surround back left speaker.
• Surround Back R adjusts the distance of the
surround back right speaker.
• Presence L adjusts the distance of the presence left
speaker.
• Presence R adjusts the distance of the presence right
speaker.
• Subwoofer adjusts the distance of the subwoofer.
y
This menu item is also available in the front panel display system
options menu (see page 89).
Notes
• You cannot adjust the distance of speakers set to "None" in
Speaker Set.
• If you are only using one surround back speaker, connect it to
the SURROUND BACK (SINGLE) jack, and adjust the
distance in Surround Back L.
SYSTEM OPTIONS
65