Information On Jacks And Cable Plugs - Yamaha RX-V463 Bedienungsanleitung

Information on jacks and cable plugs

Connect one of the type of the audio jack(s) and/or video jack(s) that your input components are equipped with.
Audio jacks and cable plugs
AUDIO DIGITAL AUDIO
L R
(White) (Red) (Orange)
L R
Left and right Coaxial
analog audio digital audio
cable plugs cable plug
■ Audio jacks
This unit has three types of audio jacks. Connection
depends on the availability of audio jacks on your other
components.
AUDIO jacks
For conventional analog audio signals transmitted via left
and right analog audio cables. Connect red plugs to the
right jacks and white plugs to the left jacks.
DIGITAL AUDIO COAXIAL jack
For digital audio signals transmitted via a coaxial digital
audio cable.
DIGITAL AUDIO OPTICAL jacks
For digital audio signals transmitted via optical digital
audio cables.
Notes
• You can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. Optical input jacks are compatible with digital
signals with up to 96 kHz of sampling frequency.
• This unit handles digital and analog signals independently. Thus
audio signals input at the digital jacks are not output at the
analog AUDIO OUT (REC) jacks.
DIGITAL AUDIO
COAXIAL OPTICAL
O
C
Optical
digital
audio cable
plug
Video jacks and cable plugs
VIDEO
(Yellow)
V
Composite
video cable
plug
■ Video jacks
This unit has two types of video jacks. Connection
depends on the availability of input jacks on your video
monitor.
VIDEO jacks
For conventional composite video signals transmitted via
composite video cables.
COMPONENT VIDEO jacks
For component signals, separated into the luminance (Y)
and chrominance (P , P ) video signals transmitted on
B R
separate wires of component video cables.
Video signal flow for MONITOR OUT
Input
P P
R B
COMPONENT
VIDEO
VIDEO
Note
The OSD signal is not output at the DVR OUT (REC) jacks.
Connections
COMPONENT VIDEO
P P Y
R B
(Red) (Blue) (Green)
P Y
P
R B
Component
video cable
plugs
Output
(MONITOR OUT)
Y P P Y
R B
13
En